Dashcam Accessories
- All Dashcams
- 1 Channel Hardwire
- 2 Channel Hardwire
- 1 Channel plug and play
- 2 Channel plug and play
- 2 Channel front and internal hardwire
- 2 Channel front and internal plug and play
- Multi Channel
- HGV Dashcams
- Van Dashcams
- Motorbike Dashcams
- Dashcam Accessories
- Sat Nav 12V
- Sat Nav 24V
- Sat Nav Accessories
- All Dashcams
- 1 Channel Hardwire
- 2 Channel Hardwire
- 1 Channel plug and play
- 2 Channel plug and play
- 2 Channel front and internal hardwire
- 2 Channel front and internal plug and play
- Multi Channel
- HGV Dashcams
- Van Dashcams
- Motorbike Dashcams
- Dashcam Accessories
- Sat Nav 12V
- Sat Nav 24V
- Sat Nav Accessories
-
Mio Mivue | WINDOW MNT 7 SERIES (340N54800021)
- WINDOW MOUNT FOR:
- 688 / 698 / C330 /751 / 752 / 792 / 785 / 786 / 788.
£14.99(Supplied, inc VAT)
-
Thinkware iVolt | Mini External Battery (Hardwired)
- Compatable with All Dash Cam Modes(Hardwire).
- Usage time: 1ch: about 20 hours (2.9Wh). 2ch: about 16 hours (3.5Wh).
- Compatible with thinkware Dash Cams.
- Directly into your vehicles fuse box.
- fully recharged in 45 minute .
- Input power: 12.0V – 15.5V / 10A MAX.
£169.00(Supplied, inc VAT)
-
Thinkware iVolt | Mini External Battery - Plug and Play
- Compatabe with All Dash Cam Models(Plug & Play).
- Usage time: 1ch: about 20 hours (2.9Wh). 2ch: about 16 hours (3.5Wh).
- Compatible with all THINKWARE Dash Cam.
- Plug the unit into the vehicle's 12v accessories plug (Cigarette socket).
- Fully recharged in approximately 80 minutes while driving.
- Output voltage / Current: 12.0V – 14.6V / 2.0A MAX.
£169.00(Supplied, inc VAT)
-
Thinkware iVolt | PRO EXTERNAL BATTERY(BAB-95)
- Compatible with all Thinkware Dash Cam models.
- Output voltage/current: 11.0 V – 14.2 V/2 A MAX.
- Charging voltage/current:
- LOW (normal-speed charge mode): 14.2 V/4.5 A Max
- HIGH (high-speed charge mode): 14.2 V/8.5 A Max).
- Cells: Lithium iron phosphate (LiFePo4).
- Product capacity: 12.8 V/7,500 mAh/96 Wh. .............................. ...........................
£349.00(Supplied, inc VAT)
-
Thinkware Multiplier Box | Multiplier Box for 5 Channel Adaptor-(MB-100)
- Converts the T700, F790, F200 Pro and X700 into a 5 channel system.
- The Mux-Box is compatible with the F200Pro, X700, T700 as well as the F790.
- Merges 4 channels into one feed
- Operate as a full DVR system.
- Split rear camera's recording into 4 smaller but still highly detailed 480p pictures on the video file.
- motion detection.
£99.00(Supplied, inc VAT)
-
Thinkware | Mount for F50, F100, F200, X150, X330 and X350 Dash Cameras(F50+Mount)
- Replacement Mounting Bracket for F70, F100, F200, F200Pro, X700 , X800, X1000.
- A steady windshield mount.
- Eliminates vibration and ensures that your dash cam does not fall off easily and miss important details upon impact.
- keeps your dash cam in place and does not block the driver’s view of the road.
£14.99(Supplied, inc VAT)
-
Thinkware | OBDII INSTALLATION CABLE-(TWA-OBD2)
- Only compatible for vehicles with an OBDII connector.
- The OBDII cable enables built-in Parking Surveillance Modes; Motion Detection, Impact Detection, Time Lapse Mode*, Energy Saving Mode.
- Battery shutdown is still enabled when using the OBDII cable..
- 3m in length.
- Not compatible with: F550 or F790.
£29.99(Supplied, inc VAT)
-
Thinkware | Polarising Filter Lens CPL-(TW-Filter)
- Compatable with All Dash Cams.
- Diameter: 14.5 mm (0.57 inch).
- Eliminate Windshield Glare.
- Reduce Light Reflections.
- Correct Overexposed Footage.
- Enhance Colour Saturation and Clarity.
- Compatible with ALL Thinkware Dash Cams.
- Reduce glare and increase the quality dash cam footage.
£17.99(Supplied, inc VAT)
-
Thinkware | Replacement Mount For F770-(F770Mount)
- Replacement Mount for F770.
- A steady windshield mount.
- Eliminates vibration and ensures that your dash cam does not fall off easily and miss
- important details upon impact.
- keeps your dash cam in place and does not block the driver’s view of the road.
- Use your dash cam in multiple cars with an adhesive mount.
£14.99(Supplied, inc VAT)
-
Thinkware | Replacement Mount For F800 - F800 Pro Mount(TWF800Mount)
- Mount for F800 / Q800 pro.
- A steady windshield mount.
- Eliminates vibration and ensures that your dash cam does not fall off easily and miss
- Important details on impact.
- keeps your dash cam in place and does not block the driver’s view of the road.
- Use your dash cam in multiple cars with an adhesive mount.
£14.99(Supplied, inc VAT)
-
Thinkware | Travel Suction Mount(TWSuctionCup)
- Suction Cup Mount for Thinkware F50, F70, F100, F200, F200Pro, x330, x350, x700
- A steady windshield mount.
- Eliminates vibration and ensures that your dash cam does not fall off easily and miss important details upon impact.
- keeps your dash cam in place and does not block the driver’s view of the road..
- Use your dash cam in multiple cars with an adhesive mount.
£9.99(Supplied, inc VAT)
-
Thinkware | U1000 Replacement Mounting Bracket-(U1000Mount)
- Mount for U1000.
- A steady windshield mount.
- Eliminates vibration and ensures that your dash cam does not fall off easily and miss
- keeps your dash cam in place and does not block the driver’s view of the road.
- Use your dash cam in multiple cars with an adhesive mount.
- All Mounts are supplied with the 3m tape already attached for easier installation.
£16.99(Supplied, inc VAT)