Dashcam Accessories
- All Dashcams
- 1 Channel Hardwire
- 2 Channel Hardwire
- 1 Channel plug and play
- 2 Channel plug and play
- 2 Channel front and internal hardwire
- 2 Channel front and internal plug and play
- Multi Channel
- HGV Dashcams
- Van Dashcams
- Motorbike Dashcams
- Dashcam Accessories
- Sat Nav 12V
- Sat Nav 24V
- Sat Nav Accessories
- All Dashcams
- 1 Channel Hardwire
- 2 Channel Hardwire
- 1 Channel plug and play
- 2 Channel plug and play
- 2 Channel front and internal hardwire
- 2 Channel front and internal plug and play
- Multi Channel
- HGV Dashcams
- Van Dashcams
- Motorbike Dashcams
- Dashcam Accessories
- Sat Nav 12V
- Sat Nav 24V
- Sat Nav Accessories
-
-
FineVu | Cigar Lighter Adapter
- 12v Socket Cigarette Lighter Cable.
- An alternate wiring method for FineVu Dashcams..
- FineVu Dash Cameras come with a hardwire kit in the box. If you do not wish to use the hardwire kit, other alternate wiring methods are the 12v Socket Cable or the OBD-II Cable.
- Note: Parking mode is not available when using the 12v Socket Cigarette Lighter Cable.
£24.99(Supplied, inc VAT)
-
FineVu | OBD-II CABLE
- An alternative solution to using the supplied hardwire kit..
- Connecting to the vehicle’s fuse box can sometimes be difficult. On some occasions an auto electrician is required.However, using an OBD-II cable removes the need for this.
- Simply connect the OBD-II cable to power the dashcam and connect the other end into your OBD port. This is almost always found on the driver’s side near and around the steering wheel column.
- Using the OBD-II cable SUPPORTS Parking Mode.
£39.99(Supplied, inc VAT)
-
Garmin | BC20 / BC30 Ext Cable (010-12043-10)
- 50FT Ext cable for wireless reverse camera.
- For BC20/BC30.
£24.99(Supplied, inc VAT)
-
Garmin | Parking Mode Hardware Power Cable for Dash Cam (010-12530-03)
- PARKING MODE CABLE.
- Hard wire cable connects your Dash Camera to constant power.
- Monitors detection when your vehicle is parked.
- Compatable with:
- DASH CAM 45
- DASH CAM 46
- DASH CAM 55
- DASH CAM 56
£29.99(Supplied, inc VAT)
-
Kenwood | CA DR1130 HARDWIRE cable
- KENWOOD CA DR1130 HARDWIRE.
- Smart Parking Mode.
- 4 meter long cable.
- 24 Hour Monitoring
- Compatible with DRVA310W, DRVA510W & DRVA610.
£24.95(Supplied, inc VAT)
-
Kenwood | KCA R110 REAR CAMERA
- Resolution : Full HD (1920x1080p) / 30 FPS
- Viewing angle : 131.6°.
- F2.0 lens which boasts industry-leading-brightness.
- High Dynamic Range (HDR).
- Smart Parking Mode .
- Compatible with DRV-A310W & DRV-A510W.
- Adjustable Rear Camera mounting holder enables viewing position change by up to 170°
- 8m cable length.
£69.95(Supplied, inc VAT)
-
Kenwood | KCAR210 REAR CAMERA
- Resolution : 2K Quad HD (2560 x 1440p) / 30 FPS
- Viewing angle : 123.6°.
- F2.0 lens which boasts industry-leading-brightness.
- High Dynamic Range (HDR).
- Smart Parking Mode .
- Compatible with DRV-A610W.
- Adjustable Rear Camera mounting holder enables viewing position change by up to 170°
- 8m cable length.
£69.95(Supplied, inc VAT)
-
Mio Mivue | 821/826 Window Pad (5413N6310013)
- WINDOW STICK-ON MOUNT for 821 / 826.
£16.99(Supplied, inc VAT)
-
Mio Mivue | A20 Rear Cam Add-On
- MIO MIVUE A20 REAR CAM ADD-ON.
- ADD-ON REAR CAMERA FOR MIVUE 751/752/792/766/786/788.
- Designed for Mio MiVue 700 series dash cams.
- 1080p Full HD (30fps).
- 140° wide angle view.
- 2.0M pixel Camera Sensor.
- Quality CMOS large sensor.
- F2.0 aperture lens.
£69.99(Supplied, inc VAT)
-
Mio Mivue | A20/ A30 Window Pad (5412N5480010)
- 3M Windscreen sticky mount pad.
- For A20/30 Rear Camera.
£16.99(Supplied, inc VAT)
-
Mio Mivue | A30 REAR CAM
- ADD-ON REAR CAMERA J85/798/C570/C540/821/826.
- Designed for Mio MiVue 700 series dash cams.
- 1080p Full HD (30fps).
- 140° wide angle view.
- Resolution for commercial rear and side cameraLatest H.264 Technology for high quality videos.
- F1.8aperture lens.
- Sony CMOS sensor.
- Compact and discreet.
£89.99(Supplied, inc VAT)