Dashcam Accessories
- All Dashcams
- 1 Channel Hardwire
- 2 Channel Hardwire
- 1 Channel plug and play
- 2 Channel plug and play
- 2 Channel front and internal hardwire
- 2 Channel front and internal plug and play
- Multi Channel
- HGV Dashcams
- Van Dashcams
- Motorbike Dashcams
- Dashcam Accessories
- Sat Nav 12V
- Sat Nav 24V
- Sat Nav Accessories
-
CELLINK | HPC HARDWIRE PR CABLE-(CELHPC)
- Hardwire Power Cable. ...................................
£24.95(Supplied, inc VAT)
-
CELLINK | OC OUTPUT CABLE-(CELLOC)
- Output cable for Dashcam.
- Not compatiable with the cellink 9 battery.
£19.95(Supplied, inc VAT)
-
FineVu | MicroSD Card 128GB GB
- FineVU 128GB MicroSD Memory Card.
- Compatible with all FineVU Dash Cams.
£39.99(Supplied, inc VAT)
-
FineVu | MicroSD Card 64 GB
- FineVU 64GB MicroSD Memory Card.
- Compatible with all FineVU Dash Cams.
£29.99(Supplied, inc VAT)
-
FineVu | OBD-II CABLE
- An alternative solution to using the supplied hardwire kit..
- Connecting to the vehicle’s fuse box can sometimes be difficult. On some occasions an auto electrician is required.However, using an OBD-II cable removes the need for this.
- Simply connect the OBD-II cable to power the dashcam and connect the other end into your OBD port. This is almost always found on the driver’s side near and around the steering wheel column.
- Using the OBD-II cable SUPPORTS Parking Mode.
£39.99(Supplied, inc VAT)
-
Garmin | Parking Mode Hardware Power Cable for Dash Cam (010-12530-03)
- PARKING MODE CABLE.
- Hard wire cable connects your Dash Camera to constant power.
- Monitors detection when your vehicle is parked.
- Compatable with:
- DASH CAM 45
- DASH CAM 46
- DASH CAM 55
- DASH CAM 56
£29.99(Supplied, inc VAT)
-
InCarTech | 4.5 inch Rear view mirror monitor (Universal Window Mount)
- Replacement rear view mirror with a built in monitor for reverse camera and video input.
- When not using the video input the mirror works as normal.
- Display Method: Digital TFT Panel.
- 4.5" Mirror Monitor, Wider Mirror and Display for more visual zone.
- Brightness: Ultra Brightness Panel, >1700cdm.
£109.99(Supplied, inc VAT)
-
InCarTech | 4.5 inch Rear view mirror monitor (With extended K10 Bracket)
- This kit consists of an extended K-10 bracket usually found in Toyota, Honda, Hyundai, GM and Ford series vehicles
- Replacement rear view mirror with a built in monitor for reverse camera and video input.
- When not using the video input the mirror works as normal.
- 4.5" Mirror Monitor, Wider Mirror and Display for more visual zone.
£109.99(Supplied, inc VAT)
-
InCarTech | 7 inch Rear View Camera Monitor/Screen (4 PIN Connection)
- 7 inch Rear View Camera Monitor/Screen (4 PIN Connection).
- Great to use when installing an aftermarket reverse camera(s) without having to affect the original factory fitted system.
- U Bracket included.
- Screen Size: 7 inch.
- Resolution: 800 x 480.
- Contrast: 500:1.
- Wire Plug: 2 X RCA Plug.
£129.00(Supplied, inc VAT)
-
Kenwood | CA DR1130 HARDWIRE cable
- KENWOOD CA DR1130 HARDWIRE.
- Smart Parking Mode.
- 4 meter long cable.
- 24 Hour Monitoring
- Compatible with DRVA310W, DRVA510W & DRVA610.
£24.95(Supplied, inc VAT)
-
Kenwood | KCA R110 REAR CAMERA
- Resolution : Full HD (1920x1080p) / 30 FPS
- Viewing angle : 131.6°.
- F2.0 lens which boasts industry-leading-brightness.
- High Dynamic Range (HDR).
- Smart Parking Mode .
- Compatible with DRV-A310W & DRV-A510W.
- Adjustable Rear Camera mounting holder enables viewing position change by up to 170°
- 8m cable length.
£69.95(Supplied, inc VAT)
-
Kenwood | KCAR210 REAR CAMERA
- Resolution : 2K Quad HD (2560 x 1440p) / 30 FPS
- Viewing angle : 123.6°.
- F2.0 lens which boasts industry-leading-brightness.
- High Dynamic Range (HDR).
- Smart Parking Mode .
- Compatible with DRV-A610W.
- Adjustable Rear Camera mounting holder enables viewing position change by up to 170°
- 8m cable length.
£69.95(Supplied, inc VAT)