Dashcam Accessories
- All Dashcams
- 1 Channel Hardwire
- 2 Channel Hardwire
- 1 Channel plug and play
- 2 Channel plug and play
- 2 Channel front and internal hardwire
- 2 Channel front and internal plug and play
- Multi Channel
- HGV Dashcams
- Van Dashcams
- Motorbike Dashcams
- Dashcam Accessories
- Sat Nav 12V
- Sat Nav 24V
- Sat Nav Accessories
- All Dashcams
- 1 Channel Hardwire
- 2 Channel Hardwire
- 1 Channel plug and play
- 2 Channel plug and play
- 2 Channel front and internal hardwire
- 2 Channel front and internal plug and play
- Multi Channel
- HGV Dashcams
- Van Dashcams
- Motorbike Dashcams
- Dashcam Accessories
- Sat Nav 12V
- Sat Nav 24V
- Sat Nav Accessories
-
CELLINK | HPC HARDWIRE PR CABLE-(CELHPC)
- Hardwire Power Cable. ...................................
£24.95(Supplied, inc VAT)
-
-
FineVu | OBD-II CABLE
- An alternative solution to using the supplied hardwire kit..
- Connecting to the vehicle’s fuse box can sometimes be difficult. On some occasions an auto electrician is required.However, using an OBD-II cable removes the need for this.
- Simply connect the OBD-II cable to power the dashcam and connect the other end into your OBD port. This is almost always found on the driver’s side near and around the steering wheel column.
- Using the OBD-II cable SUPPORTS Parking Mode.
£39.99(Supplied, inc VAT)
-
Garmin | 4m 12v DC Power Cable (010-12530-01)
- VEHICLE POWER CABLE (4M).
- Power and charge your Dash Cam while you drive with this 12'' (4 m) power cable. .
- Compatable with
- DASH CAM 45
- DASH CAM 46
- DASH CAM 55
- DASH CAM 56
- DASH CAM 65W
- DASH CAM 66W
- DASH CAM MINI
£18.50(Supplied, inc VAT)
-
Garmin | 5m 12v DC Power Cable (010-12114-02)
- Power and charge your compatible automotive camera while you drive with this power cable. ..................................
- It reaches 16-feet-4-inches (5 meters) so you can place the camera anywhere in your car. ...........................
£18.99(Supplied, inc VAT)
-
Garmin | Constant Power Cable (010-12530-23)
- CONSTANT POWER CABLE. .....................................
- PLUG INTO VEHICLE.
- CONSTANT POWER TO DASH CAMS, EVEN WHEN THE VEHICLE IS PARKED AND TURNED OFF.
- COMPATIBLE WITH MOST PASSENGER VEHICLES. .................................
- NOT COMPATIBLE WITH COMMERCIAL VEHICLE WITH A J939 CONNECTOR. ................................
£44.99(Supplied, inc VAT)
-
Garmin | Parking Mode Hardware Power Cable for Dash Cam (010-12530-03)
- PARKING MODE CABLE.
- Hard wire cable connects your Dash Camera to constant power.
- Monitors detection when your vehicle is parked.
- Compatable with:
- DASH CAM 45
- DASH CAM 46
- DASH CAM 55
- DASH CAM 56
£29.99(Supplied, inc VAT)
-
Garmin | Polarised Lens Cover (010-12530-18)
- POLARISED LENS COVER.
- Attach this polarised lens cover to your compatible Dash Cam.
- Increase video clarity.
- Reduce Reflections.
- Compatable with:
- DASH CAM 45
- DASH CAM 46
- DASH CAM 55
- DASH CAM 56 .......................................
£25.99(Supplied, inc VAT)
-
Garmin | XL Power Cable (010-12530-07)
- EXTRA LONG POWER CABLE. .............................
- POWER AND RECHARGE YOUR COMPATIBLE DASH CAM WITH THIS 26' (8M) POWER CABLE.
£25.99(Supplied, inc VAT)
-
InCarTech | 4.5 inch Rear view mirror monitor (Universal Window Mount)
- Replacement rear view mirror with a built in monitor for reverse camera and video input.
- When not using the video input the mirror works as normal.
- Display Method: Digital TFT Panel.
- 4.5" Mirror Monitor, Wider Mirror and Display for more visual zone.
- Brightness: Ultra Brightness Panel, >1700cdm.
£109.99(Supplied, inc VAT)
-
InCarTech | 4.5 inch Rear view mirror monitor (With extended K10 Bracket)
- This kit consists of an extended K-10 bracket usually found in Toyota, Honda, Hyundai, GM and Ford series vehicles
- Replacement rear view mirror with a built in monitor for reverse camera and video input.
- When not using the video input the mirror works as normal.
- 4.5" Mirror Monitor, Wider Mirror and Display for more visual zone.
£109.99(Supplied, inc VAT)
-
InCarTech | 7 inch Rear View Camera Monitor/Screen (4 PIN Connection)
- 7 inch Rear View Camera Monitor/Screen (4 PIN Connection).
- Great to use when installing an aftermarket reverse camera(s) without having to affect the original factory fitted system.
- U Bracket included.
- Screen Size: 7 inch.
- Resolution: 800 x 480.
- Contrast: 500:1.
- Wire Plug: 2 X RCA Plug.
£129.00(Supplied, inc VAT)