Dashcam Accessories
- All Dashcams
- 1 Channel Hardwire
- 2 Channel Hardwire
- 1 Channel plug and play
- 2 Channel plug and play
- 2 Channel front and internal hardwire
- 2 Channel front and internal plug and play
- Multi Channel
- HGV Dashcams
- Van Dashcams
- Motorbike Dashcams
- Dashcam Accessories
- Sat Nav 12V
- Sat Nav 24V
- Sat Nav Accessories
-
Blackvue | Rear Sticky Pad-(BVDSTAPEDRC1-100)
- Sticky pad for Blackvue DR Rear Camera series.
£2.50(Supplied, inc VAT)
-
Blackvue | Sticky Pad for DR490L-(BV101-490L)
- Sticky pad for BLACKVUE DR590X / DR590W.
£2.50(Supplied, inc VAT)
-
-
FineVu | Cigar Lighter Adapter
- 12v Socket Cigarette Lighter Cable.
- An alternate wiring method for FineVu Dashcams..
- FineVu Dash Cameras come with a hardwire kit in the box. If you do not wish to use the hardwire kit, other alternate wiring methods are the 12v Socket Cable or the OBD-II Cable.
- Note: Parking mode is not available when using the 12v Socket Cigarette Lighter Cable.
£24.99(Supplied, inc VAT)
-
FineVu | MicroSD Card 128GB GB
- FineVU 128GB MicroSD Memory Card.
- Compatible with all FineVU Dash Cams.
£39.99(Supplied, inc VAT)
-
FineVu | MicroSD Card 64 GB
- FineVU 64GB MicroSD Memory Card.
- Compatible with all FineVU Dash Cams.
£29.99(Supplied, inc VAT)
-
FineVu | OBD-II CABLE
- An alternative solution to using the supplied hardwire kit..
- Connecting to the vehicle’s fuse box can sometimes be difficult. On some occasions an auto electrician is required.However, using an OBD-II cable removes the need for this.
- Simply connect the OBD-II cable to power the dashcam and connect the other end into your OBD port. This is almost always found on the driver’s side near and around the steering wheel column.
- Using the OBD-II cable SUPPORTS Parking Mode.
£39.99(Supplied, inc VAT)
-
Garmin | Replacement Receiver for BC30 (010-12242-21)
- REPLACEMENT RECEIVER FOR BC30.
£62.99(Supplied, inc VAT)
-
InCarTech | 4.5 inch Rear view mirror monitor (Universal Window Mount)
- Replacement rear view mirror with a built in monitor for reverse camera and video input.
- When not using the video input the mirror works as normal.
- Display Method: Digital TFT Panel.
- 4.5" Mirror Monitor, Wider Mirror and Display for more visual zone.
- Brightness: Ultra Brightness Panel, >1700cdm.
£109.99(Supplied, inc VAT)
-
InCarTech | 4.5 inch Rear view mirror monitor (With extended K10 Bracket)
- This kit consists of an extended K-10 bracket usually found in Toyota, Honda, Hyundai, GM and Ford series vehicles
- Replacement rear view mirror with a built in monitor for reverse camera and video input.
- When not using the video input the mirror works as normal.
- 4.5" Mirror Monitor, Wider Mirror and Display for more visual zone.
£109.99(Supplied, inc VAT)
-
InCarTech | 7 inch Rear View Camera Monitor/Screen (4 PIN Connection)
- 7 inch Rear View Camera Monitor/Screen (4 PIN Connection).
- Great to use when installing an aftermarket reverse camera(s) without having to affect the original factory fitted system.
- U Bracket included.
- Screen Size: 7 inch.
- Resolution: 800 x 480.
- Contrast: 500:1.
- Wire Plug: 2 X RCA Plug.
£129.00(Supplied, inc VAT)
-
Kenwood | KCA R110 REAR CAMERA
- Resolution : Full HD (1920x1080p) / 30 FPS
- Viewing angle : 131.6°.
- F2.0 lens which boasts industry-leading-brightness.
- High Dynamic Range (HDR).
- Smart Parking Mode .
- Compatible with DRV-A310W & DRV-A510W.
- Adjustable Rear Camera mounting holder enables viewing position change by up to 170°
- 8m cable length.
£69.95(Supplied, inc VAT)