HIGH DEFINITION VIDEO QUALITY

CMOS Image Sensors allow crisp clean Full 1080p HD footage recording during both day and night at 30FPS. Capture more detail in all road conditions including number plates of other drivers.

The 135° wide angle lens view will minimize blind spots to assure recording of all events without fail.

Add a rear camera to capture 720p footage with a 140° wide-angle lens.

Motion Detection

Monitor and capture any motion around the vehicle for potential vandalism attempts.

Impact Detection

Monitor any impact to the vehicle while it is parked to catch any hit-and-run driver in the act while you are away.

CONTINUOUS RECORDING MODE

This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.

INCIDENT RECORDING MODE

The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.

MANUAL RECORDING MODE

Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.

FAIL-SAFE RECORDING

In the event that the power gets disconnected after an accident, the fail-safe recording uses the Super Capacitor for backup power to ensure safe storage of any recording in progress.

WIDE DYNAMIC RANGE

Avoid overexposure in your Dash Cam footage when experiencing sources of bright light whilst driving, keeping your footage clearer. Wide Dynamic Range (WDR) is technology that allows the dashboard camera to capture a clearer image in a strongly contrasted environment. It can solve problems such as intense contrasts of light sources. In the event of a sudden change in frontal light exposure, such as when driving into or out of a tunnel or driving directly into bright sunshine, the Wide Dynamic Range function will eliminate excessively bright spots on the recordings.

HIGH-TEMPERATURE PROTECTION SYSTEM

Protects your dashboard camera from overheating and causing potentially irreversible damage to it or its data. The specially designed heat discharge construction and the built-in thermal sensor of the dash cam protects the device and its data against intense heat by automatically turning it off to prevent overheating. All Thinkware cameras use a Super Capacitor, designed with Temperature Protection, for an emergency power source in the event of a crash or sudden power loss, allowing the unit to save the last 10 seconds of an incident.

FORMAT FREE TECHNOLOGY

Avoid corrupt memory cards and the slow process of having to reformat your SD Cards with the free flowing recording system.

One of the most common issues with a Dash cam’s reliability is the SD card, these cards are continuously overwritten and often become corrupt if not formatted often. This normally means that you have to remove the SD card and put it into a computer to reformat it. Thinkware have overcome this vulnerability by making the dashcam pre-allocate the memory, avoiding the need to format the SD card on a regular basis and making the footage easily viewable on our Thinkware viewer software.

ENERGY SAVING MODE

Reduce power consumption and provides longer video recording than normal parking mode. When you are away from your car for an extended period of time, energy saving parking recording is a recommended solution. When in use, the device will go to sleep and after an impact has been detected by the built-in G-sensor, it will wake up within a second and start recording for the next 20 seconds.