Dashcam Accessories
- All Dashcams
- 1 Channel Hardwire
- 2 Channel Hardwire
- 1 Channel plug and play
- 2 Channel plug and play
- 2 Channel front and internal hardwire
- 2 Channel front and internal plug and play
- Multi Channel
- HGV Dashcams
- Van Dashcams
- Motorbike Dashcams
- Dashcam Accessories
- Sat Nav 12V
- Sat Nav 24V
- Sat Nav Accessories
-
Blackvue Accessories | GPS Antenna for DR590X Series Only (BVGPSANTX)
- GPS Antenna for DR590X.
- Connector Type : Micro USB.
- Length : 1m / 3.28ft.
- Weight : 0.054lb / 27.7g.
£39.95(Supplied, inc VAT)
-
Blackvue | Conecta OBD Cable "X" Series-(CONOBDBVX)
- WORKS WITH DR5/7/9 Xxxx.
- Length: 3.5m.
- Easy installation, connects to vehicle’s OBD II port.
- Parking and Standard modes.
£25.00 -
Blackvue | HARDWIRE POWER CABLE (DR900S / DR750S / DR750-2CH LTE / DR590W)(BVHW)
- Blackvue Hardwire Cable(DR900S/DR750S /DR750-2CH LTE /DR590W).
£29.95(Supplied, inc VAT)
-
-
CELLINK | HPC HARDWIRE PR CABLE-(CELHPC)
- Hardwire Power Cable. ...................................
£24.95(Supplied, inc VAT)
-
FineVu | OBD-II CABLE
- An alternative solution to using the supplied hardwire kit..
- Connecting to the vehicle’s fuse box can sometimes be difficult. On some occasions an auto electrician is required.However, using an OBD-II cable removes the need for this.
- Simply connect the OBD-II cable to power the dashcam and connect the other end into your OBD port. This is almost always found on the driver’s side near and around the steering wheel column.
- Using the OBD-II cable SUPPORTS Parking Mode.
£39.99(Supplied, inc VAT)
-
Garmin | Parking Mode Hardware Power Cable for Dash Cam (010-12530-03)
- PARKING MODE CABLE.
- Hard wire cable connects your Dash Camera to constant power.
- Monitors detection when your vehicle is parked.
- Compatable with:
- DASH CAM 45
- DASH CAM 46
- DASH CAM 55
- DASH CAM 56
£29.99(Supplied, inc VAT)
-
InCarTech | 4.5 inch Rear view mirror monitor (Universal Window Mount)
- Replacement rear view mirror with a built in monitor for reverse camera and video input.
- When not using the video input the mirror works as normal.
- Display Method: Digital TFT Panel.
- 4.5" Mirror Monitor, Wider Mirror and Display for more visual zone.
- Brightness: Ultra Brightness Panel, >1700cdm.
£109.99(Supplied, inc VAT)
-
InCarTech | 4.5 inch Rear view mirror monitor (With extended K10 Bracket)
- This kit consists of an extended K-10 bracket usually found in Toyota, Honda, Hyundai, GM and Ford series vehicles
- Replacement rear view mirror with a built in monitor for reverse camera and video input.
- When not using the video input the mirror works as normal.
- 4.5" Mirror Monitor, Wider Mirror and Display for more visual zone.
£109.99(Supplied, inc VAT)
-
InCarTech | 7 inch Rear View Camera Monitor/Screen (4 PIN Connection)
- 7 inch Rear View Camera Monitor/Screen (4 PIN Connection).
- Great to use when installing an aftermarket reverse camera(s) without having to affect the original factory fitted system.
- U Bracket included.
- Screen Size: 7 inch.
- Resolution: 800 x 480.
- Contrast: 500:1.
- Wire Plug: 2 X RCA Plug.
£129.00(Supplied, inc VAT)
-
Kenwood | CA DR1130 HARDWIRE cable
- KENWOOD CA DR1130 HARDWIRE.
- Smart Parking Mode.
- 4 meter long cable.
- 24 Hour Monitoring
- Compatible with DRVA310W, DRVA510W & DRVA610.
£24.95(Supplied, inc VAT)
-
Mio Mivue | Hardwire Power Cable (5413N6060002)
- HARDWIRE POWER CABLE.
- 2 Wire cable.
- Doesn't Support Mio Mivue Parking Mode.
£24.99(Supplied, inc VAT)