Dashcam Accessories
- All Dashcams
- 1 Channel Hardwire
- 2 Channel Hardwire
- 1 Channel plug and play
- 2 Channel plug and play
- 2 Channel front and internal hardwire
- 2 Channel front and internal plug and play
- Multi Channel
- HGV Dashcams
- Van Dashcams
- Motorbike Dashcams
- Dashcam Accessories
- Sat Nav 12V
- Sat Nav 24V
- Sat Nav Accessories
-
Blackvue Accessories | GPS Antenna for DR590X Series Only (BVGPSANTX)
- GPS Antenna for DR590X.
- Connector Type : Micro USB.
- Length : 1m / 3.28ft.
- Weight : 0.054lb / 27.7g.
£39.95(Supplied, inc VAT)
-
Blackvue | Conecta OBD Cable "X" Series-(CONOBDBVX)
- WORKS WITH DR5/7/9 Xxxx.
- Length: 3.5m.
- Easy installation, connects to vehicle’s OBD II port.
- Parking and Standard modes.
£25.00 -
Blackvue | IR REAR CAMERA(BV101-0076)
- Additional Infra Red rear camera for Blackvue DR650 2 Channel camera.
£129.95(Supplied, inc VAT)
-
Blackvue | IR TRUCK CAMERA (BVRC110FC)
- Replacement IR Truck camera for DR770X. .
- Resolution : Full HD (1920 x 1080) @30fps.
- Waterproof IR LED night vision Rear camera.
£129.95(Supplied, inc VAT)
-
FineVu | OBD-II CABLE
- An alternative solution to using the supplied hardwire kit..
- Connecting to the vehicle’s fuse box can sometimes be difficult. On some occasions an auto electrician is required.However, using an OBD-II cable removes the need for this.
- Simply connect the OBD-II cable to power the dashcam and connect the other end into your OBD port. This is almost always found on the driver’s side near and around the steering wheel column.
- Using the OBD-II cable SUPPORTS Parking Mode.
£39.99(Supplied, inc VAT)
-
FineVu | Rear Camera Cable 6 meter
- Rear Camera Cables available in 6 metre length.
- Compatible with all FineVU Dash Cams.
£29.99(Supplied, inc VAT)
-
FineVu | Rear Camera Cable 9 meter
- Rear Camera Cables available in 6 metre length.
- Compatible with all FineVU Dash Cams.
£31.99(Supplied, inc VAT)
-
InCarTech | 4.5 inch Rear view mirror monitor (Universal Window Mount)
- Replacement rear view mirror with a built in monitor for reverse camera and video input.
- When not using the video input the mirror works as normal.
- Display Method: Digital TFT Panel.
- 4.5" Mirror Monitor, Wider Mirror and Display for more visual zone.
- Brightness: Ultra Brightness Panel, >1700cdm.
£109.99(Supplied, inc VAT)
-
InCarTech | 4.5 inch Rear view mirror monitor (With extended K10 Bracket)
- This kit consists of an extended K-10 bracket usually found in Toyota, Honda, Hyundai, GM and Ford series vehicles
- Replacement rear view mirror with a built in monitor for reverse camera and video input.
- When not using the video input the mirror works as normal.
- 4.5" Mirror Monitor, Wider Mirror and Display for more visual zone.
£109.99(Supplied, inc VAT)
-
InCarTech | 7 inch Rear View Camera Monitor/Screen (4 PIN Connection)
- 7 inch Rear View Camera Monitor/Screen (4 PIN Connection).
- Great to use when installing an aftermarket reverse camera(s) without having to affect the original factory fitted system.
- U Bracket included.
- Screen Size: 7 inch.
- Resolution: 800 x 480.
- Contrast: 500:1.
- Wire Plug: 2 X RCA Plug.
£129.00(Supplied, inc VAT)
-
Mio Mivue | A30 Cam Cable 7m (422N48900002)
- A30 /C380/798DUAL CAMERA CABLE 7M.
£19.99(Supplied, inc VAT)
-
Mio Mivue |8M CAMERA CABLE (5416N5480037)
- 8M MICRO USB REAR CAMERA CABLE WITH BUILT-IN REPEATER . .........................
- COMPATIBLE WITH A20 / A30 / A50 . ...............................
£39.99(Supplied, inc VAT)