Dashcam Accessories
- All Dashcams
- 1 Channel Hardwire
- 2 Channel Hardwire
- 1 Channel plug and play
- 2 Channel plug and play
- 2 Channel front and internal hardwire
- 2 Channel front and internal plug and play
- Multi Channel
- HGV Dashcams
- Van Dashcams
- Motorbike Dashcams
- Dashcam Accessories
- Sat Nav 12V
- Sat Nav 24V
- Sat Nav Accessories
- All Dashcams
- 1 Channel Hardwire
- 2 Channel Hardwire
- 1 Channel plug and play
- 2 Channel plug and play
- 2 Channel front and internal hardwire
- 2 Channel front and internal plug and play
- Multi Channel
- HGV Dashcams
- Van Dashcams
- Motorbike Dashcams
- Dashcam Accessories
- Sat Nav 12V
- Sat Nav 24V
- Sat Nav Accessories
-
Blackvue | Conecta OBD Cable "X" Series-(CONOBDBVX)
- WORKS WITH DR5/7/9 Xxxx.
- Length: 3.5m.
- Easy installation, connects to vehicle’s OBD II port.
- Parking and Standard modes.
£25.00 -
CELLINK | OC OUTPUT CABLE-(CELLOC)
- Output cable for Dashcam.
- Not compatiable with the cellink 9 battery.
£19.95(Supplied, inc VAT)
-
FineVu | OBD-II CABLE
- An alternative solution to using the supplied hardwire kit..
- Connecting to the vehicle’s fuse box can sometimes be difficult. On some occasions an auto electrician is required.However, using an OBD-II cable removes the need for this.
- Simply connect the OBD-II cable to power the dashcam and connect the other end into your OBD port. This is almost always found on the driver’s side near and around the steering wheel column.
- Using the OBD-II cable SUPPORTS Parking Mode.
£39.99(Supplied, inc VAT)
-
Garmin | Replacement Receiver for BC30 (010-12242-21)
- REPLACEMENT RECEIVER FOR BC30.
£62.99(Supplied, inc VAT)
-
InCarTech | 4.5 inch Rear view mirror monitor (Universal Window Mount)
- Replacement rear view mirror with a built in monitor for reverse camera and video input.
- When not using the video input the mirror works as normal.
- Display Method: Digital TFT Panel.
- 4.5" Mirror Monitor, Wider Mirror and Display for more visual zone.
- Brightness: Ultra Brightness Panel, >1700cdm.
£109.99(Supplied, inc VAT)
-
InCarTech | 4.5 inch Rear view mirror monitor (With extended K10 Bracket)
- This kit consists of an extended K-10 bracket usually found in Toyota, Honda, Hyundai, GM and Ford series vehicles
- Replacement rear view mirror with a built in monitor for reverse camera and video input.
- When not using the video input the mirror works as normal.
- 4.5" Mirror Monitor, Wider Mirror and Display for more visual zone.
£109.99(Supplied, inc VAT)
-
InCarTech | 7 inch Rear View Camera Monitor/Screen (4 PIN Connection)
- 7 inch Rear View Camera Monitor/Screen (4 PIN Connection).
- Great to use when installing an aftermarket reverse camera(s) without having to affect the original factory fitted system.
- U Bracket included.
- Screen Size: 7 inch.
- Resolution: 800 x 480.
- Contrast: 500:1.
- Wire Plug: 2 X RCA Plug.
£129.00(Supplied, inc VAT)
-
Mio Mivue | Y Cable A30 (422N48900007)
- Y CABLE A30. .............................................
£16.99(Supplied, inc VAT)
-
Thinkware Multiplier Box | Multiplier Box for 5 Channel Adaptor-(MB-100)
- Converts the T700, F790, F200 Pro and X700 into a 5 channel system.
- The Mux-Box is compatible with the F200Pro, X700, T700 as well as the F790.
- Merges 4 channels into one feed
- Operate as a full DVR system.
- Split rear camera's recording into 4 smaller but still highly detailed 480p pictures on the video file.
- motion detection.
£99.00(Supplied, inc VAT)
-
Thinkware | OBDII INSTALLATION CABLE-(TWA-OBD2)
- Only compatible for vehicles with an OBDII connector.
- The OBDII cable enables built-in Parking Surveillance Modes; Motion Detection, Impact Detection, Time Lapse Mode*, Energy Saving Mode.
- Battery shutdown is still enabled when using the OBDII cable..
- 3m in length.
- Not compatible with: F550 or F790.
£29.99(Supplied, inc VAT)